Initial Setup; Check Package Contents - NETGEAR Stora User Manual

Initial Setup

NETGEAR Stora works with both Macintosh and PC computers and comes complete with
everything you need to connect it to your network. An electronic copy of the installation guide
is also located on the product CD and on the NETGEAR website at http://netgear.com.

Check Package Contents

Before starting the installation, unpack the unit and check your package contents to be
sure all components are available:
• Stora unit
• Power cable
• Ethernet cable
• Installation guide
• Stora Resource CD, which includes the following:
- Stora software applications
- Warranty information card
- Worldwide customer support information
Note: If you purchased a Stora unit with only one disk and want to add a
second disk for redundancy, NETGEAR recommends that you first
install your Stora, then connect Stora to your network and validate
the installation before adding the disk. See
for installation instructions.
NETGEAR Stora
Install a Disk
Installation
20
on page 16