Initial Setup; Check Package Contents - NETGEAR MS2110 - Stora NAS Server User Manual

NETGEAR Stora User Manual

Initial Setup

NETGEAR Stora works with both Macintosh and PC computers and comes complete with
everything you need to connect it to your network. An electronic copy of the installation guide is
also located on the product CD as well as on the NETGEAR web site at http://netgear.com.
To setup your Stora, complete these steps:
1. "Check Package Contents" on page 1-10
2. "Connect the Stora to your Network" on page 1-11
3. "Configure your Stora" on page 1-12

Check Package Contents

1. Unpack the unit and check package
contents.
Before starting installation, unpack the
unit and check your package contents to
be sure all components are available:
• Stora unit
• Power cable
• Ethernet cable
• Installation Guide
• Stora Resource CD, which includes:
• Stora software applications
• Warranty Information
• Worldwide Customer Support
Note: If you purchased a Stora unit with only one disk, and want to add a second disk
for redundancy, NETGEAR suggests that you install your Stora, then connect
the Stora to your network and validate the installation before adding the disk.
See "Installing a Disk" on page 1-23 for installation instructions.
1-10
Figure 1-4 Package Contents
v1.0, September 2009
Getting Acquainted