Date And Time - NETGEAR Stora User Manual

routed to the Internet. Most home networks with less than 255 nodes use netmask.24.
The Server Netmask field only displays if Obtain IP address automatically is set to No.
Netmask options:
• netmask.24 (255.255.255.0)
• /8 (255.0.0.0
• /16 (255.255.0.0)
• /32 (255.255.255.255)
• Gateway. Sets the IP address of the device that routes data from Stora to the Internet
(usually a router). The Gateway field displays only if Obtain IP address automatically
is set to No.
• DNS Server 1. Sets the primary domain name server (DNS). This is obtained
automatically from your router's DHCP configuration, and is provided by your ISP.
• DNS Server 2. Sets the secondary domain name server. This is obtained
automatically from your router's DHCP configuration, and is provided by your ISP.

Date and Time

The administrator can set the date and time for Stora.
The administrator can control the following date and time settings:
• Set date and time from the Internet. Controls where Stora obtains the date and time, as
follows:
• Yes. Stora obtains the date and time from network time protocol (NTP) servers. In
most cases, use this setting. Selecting Yes displays the Internet Time Servers field,
which sets the NTP servers used by Stora. In most cases, use the default NTP
servers.
NETGEAR Stora
Stora Application
102