Downloading A Software Update - 3Com SuperStack II 3300 User Manual

140 A B: C
PPENDIX ONFIGURATION
Downloading a
Software Update
A
PPLICATION
5 Continue to hold in the configuration switch until the front panel link
status LEDs have lit up. This is usually about 10 seconds after you power
up the Switch.
6 Release the configuration switch.
7 Telnet to the Layer 3 Module IP address from any host on VLAN 1.
You will see a menu display similar to the one in Figure 12.
Figure 12 Configuration Application Menu Display
Enter in the Configuration Application menu display (Figure 12), to
1
open the Download Software Update menu, as shown in Figure 13.