Xerox DocuPrint 96 Message Manual page 106

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-28
OS1410 Sample not allowed by JDE
The <SAMPLE> key was pressed but JDE specified ABNORMAL
SECURITY = YES. The system cannot produce a sample print.
The printer control console displays:
SAMPLE CANNOT BE PRINTED--SEE MESSAGE AT THE CRT.
Action None.
OS1412 Cannot sample a secured file
The file you requested is restricted and cannot be sampled.
Action None.
OS1415 Sample of Kanji fonts not allowed
The SAMPLE command was entered, requesting a Kanji (Japanese)
font, which may not be sampled.
Note: This message should not appear on systems not sysgened for
Japanese. If it does, the requested font is corrupt, causing a false
message.
Action 1. Retry the SAMPLE command, ensuring that you are requesting
a font that may be sampled.
2. If the message reappears, contact your systems specialist or
the Xerox Font Center for assistance with replacing the font.
OS1416 Sample not allowed—Printer is busy
The SAMPLE request is not allowed at this time.
Action Retry at a later time.
OS1417 Interpress master not found; check Start command
The file from the START command "DISC:fname" parameter could
not be opened and, thus, the job could not be printed.
Action 1. Restart the job with the correct file name specified
or
2. resend and restart the job.
OS1420 Page spacing not allowed by JDE
The SPACE n PAGES command was entered. JDE specified
ABNORMAL SECURITY = YES. The system cannot space over
pages.
Action 1. Allow all data to print.
or
2. Enter the ABORT job command to cancel the job. 2.Recode
JDE, eliminating "ABNORMAL SECURITY = YES."
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE