Xerox DocuPrint 96 Message Manual page 263

Laser printing system
Hide thumbs Also See for DocuPrint 96:
Table of Contents

Advertisement

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
Master not well-formed; bad document header.
The Interpress header, "Interpress/Xerox/n.0..." was not found in a
file that required one. The file is either the Interpress master or an
SIF. A SIF problem is preceded by the error "Master Warning (page
n): Problem with insert file: "fileType>fileName.""
Action
None.
Master not well-formed; imaging operator <operatorName>
found in preamble.
One of the MASK operators was encountered in the preamble;
MARK Recovery occurs as a result of the master error.
Action
None.
Nested rendered characters not supported.
A character within the LPS font contains multiple levels of rendered
character nesting.
Action
Recreate the font by keying in the IFU ADD command and
eliminating the nested rendered characters by using the
COMPOSITE option.
Operator not implemented: <operatorName>.
A Professional Graphics operator not supported on the LPS was
found in the master.
Action
None.
Page blank due to errors.
Refer to prior messages for the cause of the blank page.
Action
None.
Page printing curtailed due to errors.
MARK Recovery was not attempted due to the severity of the error
or MARK recovery failed.
Action
None.
Parse failure; bad length for operand: <operatorName>.
An operand length exceeds the minimums described in the
Interpress standard.
Action
None.
SUMMARY SHEET ERROR MESSAGES
14-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 96mx

Table of Contents