Xerox DocuPrint 96 Message Manual page 29

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
HP1250 Transmission complete: job id xxxx
The host has completed sending the indicated job to the printer. The
job will now begin printing.
Action None.
HP1260 Interface busy - cannot send file(s)
The HIP SEND command was entered. The interface is busy and is
unable to send files from the host at this time.
Action Wait for current transmission to complete.
HP1265 Online interface already in use
The XPAF host was already online when the HIP HOST XPF
command was entered.
Action None.
HP1270 Change of job nn to file xxxxxx completed successfully
The CHANGE command successfully created the file.
Action None.
HP1280 HIP reset not allowed. Invalid task state
HIP is online and/or jobs in the HIP queue are not completed. HIP
must be offline and all jobs must be completed before the HIP
RESET command can be invoked (these restrictions do not apply at
logon level 4).
Action None.
HP1290 Host suspended pending pass-through job initiation
A pass-through job was received and the HIP online interface was
suspended.
Action None.
HP1291 HIP resuming following pass-through job
The pass-through job has completed and HIP is ready to receive data
Action None.
HP1298 XPS communications recovered
HIP can now receive data via the XPS communication mode. Data
received but not yet written to system disk will be copied from
memory (saved at system error restart) and written to system disk.
The system then reestablishes the communications link and
continues to receive the next block of data.
Action None.
HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-7