Xerox DocuPrint 96 Message Manual page 116

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-38
OS1820 Output processing is aborting current report
The automatic job recovery attempt was unsuccessful. The current
report has been deleted.
Action Restart the job
OS1821 Cannot get LUN assignment. SDI aborted.
The system diagnostics interface (SDI) has been aborted because
the logical unit number (LUN) of the tape cannot be associated with
the specified file.
Action Exit diagnostics and REAllocate the print file before the next
diagnostic print request.
OS1822 Cannot write to diagnostic print file. TPJ aborted.
An error has occurred during diagnostic print mode initialization.
Action Exit diagnostics and REAllocate the print file before the next
diagnostic print request.
OS1823 Problem with file ----> file-name. SDI aborted.
Problem with file ----> filename.TPJ aborted.
The specified form file does not exist or is in an unknown format. The
system diagnostics interface (SDI) operation has been aborted.
or
The specified form file does not exist or is in an unknown format. The
diagnostic print program has aborted.
Action Modify the diagnostic print request.
OS1824 Duplex not allowed in this configuration. SDI aborted.
Duplex not allowed in this configuration. TPJ aborted
The system is not configured for the requested duplex diagnostic
print job. The system diagnostics interface (SDI) operation has been
aborted.
or
An invalid diagnostic print request has been generated.
Action Respective as simplex and retry.
OS1825 Job queue has been flushed
The DRAIN command was entered. All data in queue has printed.
Action None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE