Xerox DocuPrint 96 Message Manual page 288

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
15-18
9049 Not a maintenance file
The DDB (Dialog Data Base) data file is being used in the wrong
mode.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9050 Dialog Release error
One or more DDB (Dialog Data Base) files in use were built for a
different version of the UI Dialog.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9051 Software version error
One or more DDB files in use were built by a different version of the
UI software.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9055 Disk I/O error code
MS-DOS has detected a disk hardware error or software data error.
Action 1. Verify that all required files are installed.
2. Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service to have disk
hardware checked for malfunction.
9056 Memory allocation error
Insufficient memory to allocate memory for internal DDB (Dialog Data
Base) operations.
Action 1. Restart the PC user interface hardware from Power On.
2. Ensure no other Microsoft Windows applications are running.
3. Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service and provide the UI Crash
Log, if available.
9059 No index file on reopen error
Intermediate DDB (Dialog Data Base) index file not found. The
missing file may represent the results of one or more previous steps
in the process of the program (MM, CD or TDB).
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service to determine recovery
point.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE