Xerox DocuPrint 96 Message Manual page 33

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
HP2160 Enter 'HIP show log continue' for more
There are more than 20 entries in the log and you must enter HIP
SHOW LOG CONTINUE to view additional screens.
Action None.
HP2165 Insufficient disk space for log files.
You have entered HIP LOG [START]. There is insufficient disk space
to begin logging.
Action Delete home files to create space for logging procedures.
HP2200 Rejected nonprint file transfer
An unacceptable nonprint file was sent; therefore, the system did not
store it. (Acceptable file types are those specified in the ACCEPT
command in HIP.LIB.)
Action Edit HIP.LIB and add the file extension to the ACCEPT=command.
HP2210 File send not allowed
The file SEND command is not permitted.
Action None.
HP2220 File specified to send does not exist
The file requested to be sent does not exist.
Action Verify that the file name is correct and retry the command.
HP2230 File send request rejected by host
The request to send a file cannot be processed.
Action Make sure the host is in a state to receive files, and retry the
command.
HP2240 Send request rejected by queue saturation
HIP SEND was rejected due to a "queue full" condition.
Action Wait until jobs have printed, then reenter the HIP SEND request.
HP2290 Pass-through pending, enter 'HIP START.'
or
Pass-through pending, select or enter 'HIP START.'
A pass-through job has been sent from the XPAF host; HIP must be
started.
Action None.
HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-11