Xerox DocuPrint 96 Message Manual page 190

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-112
OS7500 Insufficient memory for JDE.
OS7510 Insufficient memory for JDE Tables.
OS7520 Insufficient memory for VFU Tables.
OS7530 Insufficient memory for CME Tables.
OS7550 Insufficient memory for input buffers.
The number of features specified in JDE requires more main memory
than is available; or multiple "DJDE JDE =" or "JDL =" commands
were incorrectly invoked in a single report.
Action 1. Recreate the job, reducing the number or extent of features.
or
Recode DJDE correctly. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS PDL Reference .)
2. Restart the job.
OS7551 Insufficient dynamic memory for PDE Table.
System dynamic memory is exhausted.
Action Check application and retry.
OS7600 DJDE/Delimiter file overflow.
The memory needed by input task to accomplish DJDE/Delimiter
processing exceeds the memory available.
Action 1. Reduce the complexity of form. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS Forms Creation Guide .)
2. Rerun the job to determine if failure is an intermittent CPU/
memory failure.
3. If the failure recurs, contact your systems specialist or Xerox
representative to obtain additional memory capacity. The job
cannot be processed without it.
OS7610 RTEXT File overflow.
The memory needed by the input task to accomplish Routing Text
processing exceeds memory available.
Action 1. Check the form and recompile if an error is found. (Refer to
DocuPrint 96/DocuPrint 96MX LPS Forms Creation Guide .)
2. Rerun the job to determine if the failure is an intermittent CPU/
memory failure.
3. If the failure recurs, recreate the job, reducing the RTEXT
parameters.
OS7620 Cannot recover from DJDE processing error.
The system could not find the file specified by DJDE. (This message
appears in conjunction with messages OS6713-6719.)
Action See the explanation for messages OS6713 - OS6719.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE