Printer Control Console - Xerox DocuPrint 100 Operator's Manual

Operator Guide

Printer control console

The printer control console is the color monitor located on top of
the printer. It keeps you informed of the printer status, and
enables you to control certain functions of the printer, such as
stopping printing and continuing an interrupted job, without
returning to the controller.
The printer control console has the following features:
• Printer mimic: Local controls and displays for jam
clearance, paper loading and unloading, and diagnostics and
service (used by the service representative).
• Touch-sensitive areas: Allow you to select options by
touching the printer control console screen. A tone sounds
when you touch one of these areas.
• Printer alarm: Gives three beeps, repeated for ten seconds.
The alarm is generated by any event that stops the printer.
The alarm stops after three cycles or as soon as you start to
clear the fault condition (for example, when you open printer
doors or covers specified in the clearance instructions). You
can stop the alarm by pressing one of the printer control
console buttons or by selecting a function through the touch
screen.
Overview
1-17