Xerox DocuPrint 96 Message Manual page 283

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
3539 Creation of Console Log File failed
3540 Read Console Log File Header failed
3541 Write Console Log File Header failed
3542 Reset Console Log File Header failed
For message numbers 3539, 3540, 3541, or 3542, the create, read,
write, or reset console log file operation you have tried has failed due
to a hardware problem.
Action 1. Check disk drive to ensure that DOS formatted console log disk
is inserted in disk drive, if applicable.
2. Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service to investigate possible
hardware disk failure.
3548 Unable to allocate memory for file view
There is not enough memory to allocate for file view.
Action 1. Ensure that the UI hardware memory is properly configured and
available.
2. Ensure memory is not being committed to other purposes, like a
RAM drive.
3. Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
3549 Unable to allocate memory for Console Log write buffer
Unable to allocate memory for use in writing entries in console log.
Action 1. Restart the PC user interface hardware from Power On.
2. Ensure no other Microsoft Windows applications are running.
3. Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service and provide the UI Crash
Log, if installed.
3550 Unable to read last Console Log Data record
Unable to read last record from console log.
Action 1. Check disk drive to ensure that console log disk is inserted in
disk drive, if applicable.
2. Save the console log to a different name for later diagnoses,
then empty the original console log.
3. Select the OK header button to retry the process. If the problem
persists with new log, call Xerox Customer Service to
investigate possible hardware disk failure.
15-13