Xerox DocuPrint 96 Message Manual page 204

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-126
OS9310 Output disk error. Page won't be printed. ABORT O or
The page cannot be printed because print data cannot be read off
disk due to a system disk error. (This message is followed by
message OS2000.)
The printer control console displays:
OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action 1. Enter the CONTINUE O command for the job to print with one
page missing.
or
Enter the ABORT O command to cancel the report.
2. Restart the job.
3. If the problem continues, contact your systems specialist or
Xerox Customer Service.
Note: CRT refers to the DocuPrint 96/DocuPrint 96MX LPS system
controller display.
OS9320 Graphic imaging error. Page won't be printed. ABORT O.
A graphic is positioned or scaled off the page.
The printer control console displays:
OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action 1. Enter the CONTINUE O command for the job to print with one
page missing.
or
Enter the ABORT O command to cancel the report.
2. Recreate the job, reducing the number and/or size of graphics.
3. If the problem continues, contact your systems specialist or
Xerox representative to obtain additional memory capacity.
Note: CRT refers to the DocuPrint 96/DocuPrint 96MX LPS system
controller display.
OS9325 Imaging device error. Page won't be printed. ABORT O.
An irrecoverable error has occurred twice on the same page.
Action 1. Enter the CONTINUE O command for the job to print with one
page missing.
or
Enter the ABORT O command to cancel the report.
2. Recreate and retry the job.
3. If the problem continues, contact your systems specialist.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE