Xerox DocuPrint 96 Message Manual page 196

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-118
OS8410 Byte aligned disk I/O request... input aborting.
The input task issued a disk input/output request on a byte boundary
rather than a correct word boundary. The job is aborting.
Action 1. Restart the job. This message should not reappear if the failure
was an intermittent CPU/memory failure or software error.
2. If the message recurs, contact your systems specialist or Xerox
Customer Service
OS8420 Bad LBN on disk I/O... input aborting.
The input task has issued a disk input/output request with an invalid
disk logical block number. The job is aborting.
Action 1. Restart the job. This message should not reappear if the failure
was an intermittent CPU/memory failure or software error.
2. If the failure recurs, save the tape or data and contact your
systems specialist or Xerox Customer Support.
OS8430I Illegal address space on disk I/O...input aborting.
The input task has issued a disk input/output request using an invalid
memory address. The job is aborting.
Action 1. Restart the job. This message should not reappear if the failure
was an intermittent CPU/memory failure or software error.
2. If the failure recurs, save the job tape or data and contact your
systems specialist or Xerox Customer Support.
OS8500 System reliability log lost.
The system reliability log (error log) file cannot be accessed due to
an apparent file management problem.
Action 1. Enter the PROBLEM command to help define the condition.
2. Resysgen the disk to correct the problem, if authorized to do so
(refer to your DocuPrint 96/DocuPrint 96MX LPS OSS System
Program Description ["-11"]),
or
Contact your systems specialist.
OS8550 Drive xxx not useable: no disk ID.
The indicated disk drive cannot be used because it has not been
formatted for your system.
Action Format the disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
System Generation Guide .)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE