Xerox DocuPrint 96 Message Manual page 213

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
PD1110 JSL contains unsupported features.
There are features invoked in the JSL which are not currently
supported by the DocuPrint 96/DocuPrint 96MX.
Action None.
PD1200 Use the IFU IPFNTS Command to compile IPFNTS.
PDL no longer supports the interpress font mapping feature. Use IFU
for that purpose.
Action None.
PD2700 Operator command error, retry.
A PDL command was entered incorrectly.
Action Reenter the command correctly.
PD2740 JSL not found. Check and retry.
JSL id was entered incorrectly.
Action Reenter the JSL identification correctly.
or
Enter a different JSL id.
PD2915 Security violation.
A requested file has been protected by the SECURE system
command. An attempt was made to access it at a wrong logon level.
Action To access the file, obtain the correct password and logon at Level 5.
(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
Reference , chapter 1, "System setup," "File access and command
protection commands" section.)
PD4500 Tape read error.
The magnetic tape format does not match the language code entered
in JSL
Action Reenter the code correctly.
PD4550 PDL internal error -- Tape I/O.
The system is unable to read a magnetic tape block. Compiling will
abort.
Action 1. Clean the magnetic tape drive. (Refer to the maintenance
chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
Guide .)
2. Restart the job.
3. If the problem recurs, recreate the tape.
PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
7-3