Xerox DocuPrint 96 Message Manual page 14

CP (COMPRESS COMMAND) MESSAGES
1-2
CP2700 Invalid keyin
The compress command was entered incorrectly.
Action Reenter command correctly
CP2710 Keyins are not allowed at this time
Compress process has begun. System cannot process any other
commands entered at this time.
Action Wait for entire compress process to complete. Reenter command.
CP2720 Invalid start command
The COMPRESS start command was entered incorrectly.
Action Reenter COMPRESS.
CP7010 Unable to compress this disk. Use DSR - COMPRESS MODE
The COMPRESS command was entered, but disk contains so many
files that there is not enough internal memory to load COMPRESS
task.
Action Perform DSR, selecting compressed object mode, to compress the
disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
Reference chapter on managing LPS resources for additional
information.)
CP9100 File integrity error. Edit and print CPR000.TMP
The system has discovered a multi-allocated sector and is listing it in
a special file (CPR000.TMP). The compress function is terminated.
Action Print CPR000.TMP error log to locate the problem.
Call Xerox Customer Service with the information above.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE