Xerox DocuPrint 96 Message Manual page 162

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-84
OS4651 Output has recovered to page boundary.
Automatic job recovery has been initiated after a system rollover.
Output has resumed printing at the page where the software failure
occurred.
Action Follow instructions on the printer control console display and wait
until printing resumes and completes the job.
OS4652 Possible duplicate pages due to recovery. Check output.
There may be duplicate pages resulting from the automatic job
recovery process.
Action Check your output for these possible extra pages.
OS4700 System has no tape drive.
A magnetic tape-related command was entered. Your system is
unable to process it because it is an "online only" system
Action None.
OS4710 The specified tape unit is unavailable.
Check the command and reenter correct tape unit.
Action None.
OS4720 Assign LUN failed.
The attempt to assign a logical unit number as the result of a SUB
DEV command has failed.
Action Check the command and reenter correct tape unit.
OS4800 Power failure - waiting for disk.
The system temporarily lost power due to a power outage or a
disconnect from its electrical source.
Action Wait for further instructions to appear on the printer control console
display.
OS4810 System power-failure recovery in progress.
The system temporarily lost power due to a power outage or a
disconnect from its electrical source. Automatic job recovery is being
attempted.
Action Follow recovery instructions as they appear on the printer control
console display.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE