Xerox DocuPrint 96 Message Manual page 215

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
PD8550 I/O error, processing SEF mapping file.
An I/O error occurred while processing the Short Edge Feed font
mapping file.
Action Recompile the JSL that generated the requested mapping file and
retry the operation.
PD8570 Device does not exist %0.
The specified device does not exist. Check command and retry.
Action None.
PD8800 Insufficient dynamic memory, try rebooting system.
Not enough core memory remains for the entered command.
Compiling will abort.
Action 1. Reboot the system by pressing the Boot button and entering B
at the keyboard.
2. Retry compiling JDL.
3. If the message reappears, contact your systems specialist or
Xerox Customer Service.
PD9400 DISK ERROR—JDL FILE
PD9410 DISK ERROR—WORK FILE
PD9420 DISK ERROR—SOURCE FILE
PD9430 DISK ERROR—CME FILE
PD9440 DISK ERROR—PDE FILE
PD9450 DISK ERROR—PRINT FILE
PD9460 DISK ERROR—PCC TABLE
PD9470 DISK ERROR—CATALOG FILE
PD9480 DISK ERROR—RTEXT FILE
The system is unable to access or perform any operation on the
indicated file because of a fatal system disk error.
Action 1. Retry the command. This message should not reappear if the
failure was an intermittent system disk error
2. If the message reappears, contact your systems specialist or
Xerox Customer Service.
PD9500 Open error —Print File.
The system is unable to open the print file due to a system disk error.
Action 1. Retry compiling.
2. If the message reappears, contact your systems specialist or
Xerox Customer Service.
PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
7-5