Xerox DocuPrint 96 Message Manual page 100

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-22
OS1279 Command file error - label not found
An incorrect prefix was entered for the command file.
Action Reenter the statement correctly.
OS1280 Message file is not defined. Requesting ******;
message file: **;
OS1282 Message file does not exist. Requesting task: ******; Message
file: **;
The message file containing the message that should be displayed
for the indicated task does not exist on the system disk.
Action 1. Document circumstances of the message appearance.
2. Record any additional messages displayed in conjunction with
it.
3. Contact your systems specialist or Xerox Customer Service
with the above information.
Note: Messages OS1280 and OS1282 should not appear. If one of
these messages should occur:
OS1283 Unexpected Barcode encountered
The IOT read a barcode when there should not have been one.
Action Abort the job and correct the job programming or continue the job in
the BAR OFF mode.
OS1285 Message does not exist. Requesting task: ******;
OS1287 Should not display this message. Requesting task: ******;
The message file containing the message that should be displayed
for the indicated task does not exist on the system disk.
Action 1. Document circumstances of the message appearance.
2. Record any additional messages displayed in conjunction with
it.
3. Contact your systems specialist or Xerox Customer Service
with the above information.
Note: Messages OS1285 and OS1287 should not appear. If one of
these messages should occur:
OS1290 Cluster file full
The file containing the list of clusters is full.
Action Delete one or more clusters, and retry.
Note: The file can only contain 152 clusters
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE