Xerox DocuPrint 96 Message Manual page 307

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
Failure to stop AUD file Mgr.
This may occur when the Exit To DOS option is selected from the
System Control or Utilities Menu. The File Manager used for auditing
has failed to properly terminate.
Action If the problem persists, call Xerox Customer Service.
FCG Exiting: Duplicate Profile Entries
When searching the FCG.LIB file for the specified profile label, FCG
will return the following message if 2 profile labels are identical in
name to the specified profile label.
Action None.
FCG Exiting: FCG.LIB not present on system.
The profile library you have entered cannot be found.
Action None.
FCG Exiting: Finishing Device %0 not found
You have requested a profile label that does not exist in the FCG.LIB
file.
Action None.
FCG Exiting: Finishing Device <profile-name> not found
The personality profile name you have requested is not contained in
the specified FCG.LIB. This message is followed by message
OS1976 Profile not loaded.
Action None.
FCG Exiting: Invalid command
You have requested a command that does not exist in the FCG's task
capabilities.
Action None.
FCG Exiting: Invalid Profile Encountered.
The following message is displayed if the information necessary for
the FCG SHOW command is not present on the system.
Action None.
FCG Exiting: Invalid profile—missing semicolon (;)
A semicolon is required at the end of a profile label and its
parameters. You have failed to enter the semicolon.
Action None.
15-37