Xerox DocuPrint 96 Message Manual page 199

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS8855 Invalid form file header.
The input task is unable to read a form file header due to software or
disk/CPU problems. The job will abort.
Action 1. Recompile the form with the correct file header. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Forms Creation Guide .)
2. Reload form file to system disk. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS Operations Reference chapter on
managing LPS resources for additional information.)
3. Restart the job.
OS8860 Page format error. Page will not be printed.
The job has improper metacodes.
Action 1. Retry the job.
2. If the message reappears, check the software package that
emits the metacodes, to ensure that the level is current.
3. Contact your systems specialist or Xerox Customer Support for
assistance, if necessary.
OS8950 Insufficient dynamic memory to run requested task.
Not enough dynamic memory remains to load the requested task.
Memory has been reported as inoperable during the system boot, or
the system disk file of the desired task has been modified.
Action 1. Reboot the system by pressing the Boot button and entering B.
2. Restart the job.
3. If the problem continues, resysgen if authorized to do so (refer
to your DocuPrint 96/DocuPrint 96MX LPS System Generation
Guide ),
or
Contact your systems specialist.
OS8960 File management initialization failure - Reboot.
The system's attempt to initialize file management processing has
failed.
Action Reboot the system.
OS8970 Cannot open recovery file.
The automatic job recovery file which contains data necessary to
recover after a system rollover has been left in a state such that it
cannot be accessed.
Action Resysgen the disk to recreate the file (refer to your DocuPrint 96/
DocuPrint 96MX LPS System Generation Guide ),
or
Contact your systems specialist.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-121