Xerox DocuPrint 96 Message Manual page 321

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
Read error during save.
The record manager has detected a read error during an Audit Log
save operation.
Action If the problem persists, call Xerox Customer Service.
Report definition file read / open error.
The report definition file cannot be opened. Audit Log display or
printing cannot be performed.
Action If the problem persists, call Xerox Customer Service.
Segmented or duplicate attribute not allowed for AUD File Mgr
Autoincrementing key.
TBD
Action If the problem persists, call Xerox Customer Service.
Select DOWNLOAD CONTROLLER or enter PSC when you wish
to attempt connection to the Printer
The system controller is currently not able to communicate with the
printer. You can use system controller utilities such as the Editor, but
you cannot print.
Action Select the Download Controller window from the Disks utility or enter
PSC in the command line message window if you want the system
controller to attempt to establish communication with the printer.
Set Tray Size is unavailable in print
You cannot set tray size while the LPS is printing. Wait until the LPS
cycles down or finishes printing.
Action None.
Sheet delivery signal but no output phase record exists.
A sheet delivery signal has been received but no output phase exists
for the report. Auditor has not recorded start of output.
Action If the problem persists, call Xerox Customer Service.
Sheet delivery signal but not processing output phase.
A sheet delivery signal has been received but no output phase exists
for the report. Auditor has not recorded start of output.
Action If the problem persists, call Xerox Customer Service.
15-51