Xerox DocuPrint 96 Message Manual page 248

SUMMARY SHEET ERROR MESSAGES
14-4
Overlapping form copy ranges on one page.
Multiple forms per page were requested and the LPS does not have
the Raster Image Processor (RIP) option.
Action 1. Merge the multiple forms into a single FSL.
2. Reference the new form file in the document.
3. Resend the document.
System does not handle graphics.
The LPS does not support GHO/GVG, or GHO/GVG and the JSL
have the option GRAPHICS = NO specified.
Action None.
Unexpected error detected by RIP <I/O error code: nB>.
An error was found by Raster Image Processor (RIP) in processing
the page. The only code which is expected is 3758, which indicates
that the page was too complex for RIP.
Action 1. Download the Raster Image Processor (RIP) software via the
PSC RIP command.
2. Resend the document.
3. If the problem continues, contact your systems specialist or
Xerox support.
Note: In this message, the letter "B" indicates an octal value.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE