Printer Control Console - Xerox DocuPrint 100 Installation Planning Manual

Printer components and options

Printer control console

3-2
The printer provides control buttons and displays for basic printer
functions and status information. The printer control console
displays messages and graphics that assist you with jam
clearance and printer maintenance. Labels are located
throughout the printer to assist you with a variety of tasks such
as clearing a paper jam.
Refer to the Xerox DocuPrint 100/115/135/155/180 Enterprise
Printing System Operator Guide for detailed description of the
features and operation of the printer components.
The printer control console is the color monitor located on top of
the printer. It displays messages and graphics that alert you to
paper jams and other fault and status conditions (such as low dry
ink). It also contains buttons that allow you to control certain
functions of the printer (for example, continuing an interrupted
job) without returning to the controller.
The printer control console has the following features:
• Local controls and displays for jam clearance, loading
paper, unloading output, and diagnostics and service (used
by the service representative). Two types of messages are
displayed on the printer control console: fault messages,
which relate to printer malfunctions; and information
messages, which relate to printer conditions such as low dry
ink.
• Touch-sensitive areas that allow you to select options by
touching the console screen. A tone sounds when you touch
one of these areas.
• Attention alarm tone consisting of three beeps, repeated for
ten seconds. The alarm sounds for any event that stops the
printer and requires operator attention. The alarm may be
disabled by the operator.
The tone stops after three cycles, or when the fault condition
is cleared or clearing has started (for example, doors or
covers specified in the clearance instructions are opened).
You can stop the tone by pressing one of the printer control
console buttons or by selecting a function through the touch
screen.
Installation Planning Guide