Xerox DocuPrint 96 Message Manual page 170

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-92
OS6300 Current report saturates disk. Enter option: "CONTINUE I" -
continue multicopy mode.
The report currently being input exceeds the capacity of the print file.
Select one of the following:
Action Enter the CONTINUE I command to resume multicopy printing. Input
slows, resuming speed when more disk space is freed.
or
"PRINT 1" - print one copy of current report
Enter the PRINT 1 command. The system prints one copy of the
report.
or
"ENDJOB" - print all copies of report so far, end
Enter the ENDJOB command. All material already in the print file is
printed; the rest is abandoned.
or
"ABORT O"- abort current report
Enter the ABORT O command. The current report is deleted.
or
"ABORT JOB x" - abort current job
Enter the ABORT job command. The entire job is cancelled.
OS6350 Accounting data may be corrupt.
An irrecoverable error occurred while the system was updating the
accounting file. Some information may be lost or inaccurate.
Action None.
Note: While no immediate action is required, the accounting logs
should be examined carefully if this message appears.
OS6360 Incorrect page sequence detected. Pages will be purged.
The system has detected a possible problem with the sequence in
which pages are being printed. All pages in progress will be purged
and the system will attempt to restart the job at the last known good
page.
Action None.
OS6450 Print file problem due to graphics.
The page log entry with the graphics specified will not fit in the page
log sector on the system disk. The job will abort.
Action Recreate the job, reducing the amount of graphic data.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE