Xerox DocuPrint 96 Message Manual page 247

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
Feature requires RIP option; diagonal lines.
Diagonal lines can be drawn only with the Raster Image Processor
(RIP) option.
Action None.
Feature requires RIP option; graphic figures/lines.
The operations are only supported with the Raster Image Processor
(RIP) option.
Action None.
Feature requires RIP rounded line endings and nonmitered
joints.
Rounded line endings are supported only with the Raster Image
Processor (RIP) option.
Action None.
Font problem; regarding n point (rotated n degrees) font
"interpressFontName"...
This is the general font problem message which precedes several
other messages and is issued when font problems are found during
text processing.
Action None.
Form file not found: "fileType>fileName."
When processing an SIF, no file with the name filename.filetype was
locally available to the DocuPrint 96/DocuPrint 96MX LPS.
Action Load the form on the LPS or change the form reference in the
document and resend the document.
Further "No font for output character set ..." messages
suppressed.
Many ... no font for output character set ... messages have been
issued; further occurrences will not be reported.
Action None.
Imaging operator <operatorName> available only with RIP
option.
The identified imaging operator is implemented in conjunction with
the Raster Image Processor (RIP) option.
Action 1. Remove the object from the document which caused the error.
2. Resend the document.
SUMMARY SHEET ERROR MESSAGES
14-3