Xerox DocuPrint 96 Message Manual page 114

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-36
OS1730 Clear invalid with display, clear ignored
The editor CLEAR command was entered while the DISPLAY
command was in effect. The system cannot clear the working file
because sections of it are being displayed.
Action 1. Press any key other than <ENTER> to halt the display.
2. Reenter the CLEAR command.
OS1745 Reset in progress, key-in ignored
The command entered cannot be processed at this time. The system
is removing all jobs from queue and clearing any sheets in the paper
path.
Action Reenter the desired command when READY FOR COMMANDS
appears on the display.
OS1750 Nothing to abort
The ABORT I, ABORT O, or ABORT job command was entered and
cannot be processed. No jobs are currently queued, being input, or
printing.
Action None.
OS1760 Reel-to-reel tape unit selected
The magnetic tape drive has been selected.
Action None.
OS1761 Cartridge tape unit selected
The 180 CTS has been selected.
Action None.
OS1765 Tape unit x selected
The tape unit indicated in the message has been selected.
Action None.
OS1766 Input tape device initialized to x:
This message names the selected input tape device being used.
Action None.
OS1770 "ONLINE" input is waiting for data
The START and ONLINE commands were entered. The system is
online to a host computer and is waiting for data to be transmitted
from the host.
Action None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE