Xerox DocuPrint 96 Message Manual page 108

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-30
OS1510 Page spacing stopped by End-of-Report
The SPACE n PAGES command was entered. The system cannot
space forward any more because it sensed a tape label indicating the
end of the report.
Action None.
OS1520 Block spacing stopped by End-of-File
The MOVE n BLOCKS command was entered, but the system has
reached the End of File tape label and cannot move forward over any
more text.
Action None.
OS1530 Cannot backward space any more pages
The SPACE -n PAGES command was entered. The system cannot
space backward any more pages because it is printing the last or only
copy of a report. (Pages were cleared from system disk immediately
after printing.)
Action None.
OS1535 Formatting WP Exception index page
Exception Page is being created, indicating errors in report being
sent from workstation. Page will be delivered as last page of report.
Action 1. Check Exception Page for location of errors in report.
2. Remake job if desired.
OS1540 Cannot space past start of job
One of the following commands was entered:
MOVE n BLOCKS
MOVE n FILES
SPACE n PAGES
SPACE n REPORTS
The system has reached the beginning of a job and cannot space
backward any farther.
Action None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE