Xerox DocuPrint 96 Message Manual page 300

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
15-30
Cannot allocate memory for report phase record during crash
recovery.
Insufficient Windows resources to allocate a report phase record to
support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot allocate memory for waste management record.
Insufficient system memory exists to allocate memory for a waste
management record.
Action If the problem persists, call Xerox Customer Service.
Cannot expand memory region.
Insufficient system memory available to display a large list of Audit
Logs.
Action Try a filtered list of logs, if the problem persists, call Xerox Customer
Service.
Cannot find input phase to match output phase.
An output signal has been received that cannot be matched by report
number to its corresponding input.
Action If the problem persists, call Xerox Customer Service.
Cannot open in-process file for crash recovery.
The record manager is unable to open the in-process file to support
crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot open Master Directory file for crash recovery.
The record manager is unable to open the master directory file to
support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot read in-process file during crash recovery.
The record manager has detected an error while reading the in-
process file to support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot save a log onto itself.
You cannot save a console log to hard disk under the name "current
log."
Action Save the log under a different name.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE