Xerox DocuPrint 96 Message Manual page 94

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-16
OS1106 Lowercase characters not valid in machine serial number
Lowercase characters are not valid in the machine serial number.
Action 1. Verify the tray(s) or bin(s) in your command.
or
Select a different tray or bin.
2. Retry the command.
OS1131 FEX: Problem communicating with the IOT. Exiting.
FEX has detected a problem communicating with the printer.
Action Restart FEX.
OS1132 --- NVM Finishing locations ---
This message lists the values that are currently in the printer's non-
volatile memory.
Action Save (write down) these values so that you can restore them should
an FEX communications problem lose these values from the printer's
non-volatile memory.
OS1133 FEX: Warning, number of pages is greater than 23.
This message advises you that you have selected too many pages
for the FEX test print job.
Action 1. Select fewer pages for the test case job.
2. Retry running FEX.
Note: This may be an issue only with certain finishing devices
which require readjustments for page sets of more than 23
pages. Consult your finishing device documentation for
additional information.
OS1134 Checking for existence of x.x on system
FEX is looking for the requested .FRM directory in the system's
memory. If FEX finds the requested form name, it will show 'FOUND'
on the display.
Action None.
OS1135 FEX: Error, Form: x.x does not exist. Exiting.
FEX cannot find the requested .FRM directory in the system.
Action Verify the form directory (file-name) and retry the command.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE