Delay; 077: L/C/R Delay; 078: L/C/R Long Delay - Korg NAUTILUS Series Parameter Manual

Delay

077: L/C/R Delay

This multitap delay outputs three Tap signals to the left,
right, and center respectively. You can also adjust the stereo
width of the delays.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Input Level D-mod
+
C Delay
High Damp Low Damp
R Delay
Input Level D-mod
Right
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.823.
Source
Selects the modulation source for the input level. p.823.
DELAY
L Delay Time [msec]
Sets the delay time of the Left Delay.
Level
Sets the output level of the Left Delay.
C Delay Time [msec]
Sets the delay time of the Center Delay.
Level
Sets the output level of the Center Delay.
R Delay Time [msec]
Sets the delay time of the Right Delay.

078: L/C/R Long Delay

This multitap delay outputs three Tap signals to left, right
and center respectively. You can set a maximum of
5,460msec for the delay time.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.823.
Wet / Dry
L Delay
Level
Spread
Level
Feedback
Level
Wet / Dry
[+/–100]
[Off...Tempo]
[0...2730]
[0...50]
[0...2730]
[0...50]
[0...2730]
Wet / Dry
L Delay
Level
C Delay
Spread
Level
Feedback
R Delay
Level
Wet / Dry
[+/–100]
Level
Sets the output level of the Right Delay.
Feedback (C Delay)
Sets the feedback amount of the Center Delay
Source
Selects the modulation source of the Center Delay feedback
amount.
Amount
Sets the modulation amount of the Center Delay feedback
amount.
High Damp [%]
This controls a low-pass filter in the feedback loop, which
"damps" (reduces) high frequencies. Higher settings mean
more damping, resulting in increasingly darker timbres as
the feedback continues.
Low Damp [%]
This controls a high-pass filter in the feedback loop, which
"damps" (reduces) low frequencies. Higher settings mean
more damping, resulting in increasingly highpassed, lighter
timbres as the feedback continues.
Spread
This controls the stereo width of the effect. The stereo image
is widest with a value of 50, and narrows to mono with a
value of 0.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
Source
Selects the modulation source for the input level. p.823.
DELAY
L Delay Time [msec]
Sets the delay time of the Left Delay.
Level
Sets the output level of the Left Delay.
C Delay Time [msec]
Sets the delay time of the Center Delay.
Level
Sets the output level of the Center Delay.
Delay 077: L/C/R Delay
[0...50]
[+/–100]
[Off...Tempo]
[+/–100]
[0...100]
[0...100]
[0...50]
[Off...Tempo]
[0...5460]
[0...50]
[0...5460]
[0...50]
833