Table of Contents
Advertisement
GLOBAL mode
LCD Setup
This lets you adjust the brightness of the LCD screen.
1. Choose LCD Setup to open the dialog box.
2. Adjust the Brightness as desired.
Brightness: 0...63 (63 is the default)
Adjusts the brightness of the display's backlight.
3. To finish the LCD Setup, press the OK button. To
cancel without making changes, press the Cancel
button.
Update System Software
Before you start the update process, back up important
data on external USB storage media.
1. Using a computer, download the update from the
Korg website: www.korg.com/NAUTILUS.
The update will be in compressed, zip format.
2. Un-zip the downloaded file.
Un-zipping will result in a folder containing several different
files and at least one sub-folder, with names such as:
install.info
mnt (folder)
posttar.sh
pretar.sh
Update[number].tar.gz
Files may have different names, and there may also be
additional files. Note that some file names may end with
"tar.gz" or "tgz;" this is normal, and these files are ready for
use by the installer without need for further un-zipping.
Note: Depending on your browser settings, the downloaded
file may be unzipped automatically, creating the files and
folders described above.
3. Follow any instructions included with the update.
4. Open the folder from step 2, above.
5. From within this folder, copy all of the files and sub-
folder(s) to the root level of a FAT32-formatted USB
storage device, such as a USB flash drive.
Copy the files and sub-folders only; don't copy the main,
enclosing folder.
FAT32 format is required. Other formats, including NTFS
(Windows) or HFS+ (Mac OS X), will not work. Most
USB flash drives use FAT32 by default.
6. Disconnect all USB devices from the NAUTILUS.
Other USB devices may interfere with the update process.
7. Go to the GLOBAL > Basic Setup page.
686
To go to this page from any part of the system, press the
GLOBAL button to enter GLOBAL mode, and press the
EXIT switch up to four times. (This always takes you to the
first page of the selected mode.)
8. Open the menu, and select the command "Update
System Software."
A dialog will appear on the screen:
Connect the Software Update media, and press OK.
9. Connect the USB storage device containing the update
file(s), from step 5 above.
10.Press the OK button.
A window will appear with the message "Searching for
update files..."
If a valid update file is found, a new dialog will appear:
Found version [version number] updater files
Press OK to install
11.Press the OK button again.
A message and progress bar will appear on the screen, noting
that the system is being updated.
Do not disconnect the USB storage device while the
update is in progress.
While the system is being updated, do not touch the
NAUTILUS' switches, and never turn off the power. If
the power is accidentally turned off while the system is
being loaded, the NAUTILUS may become inoperable. If
this occurs, using the Restore DVDs may be required;
please contact your local Korg distributor.
When the update is complete, a new message will appear:
Update to NAUTILUS system version [nn] complete.
Please turn off the power, wait a moment, and then turn
on power again to use the new software.
12.Turn off the NAUTILUS, and then disconnect the
USB storage device.
13.Wait approximately ten seconds, and then turn the
power on again.
The system version number is shown on the startup
screen, and also on the GLOBAL P6–Options Info page.
Verify that it is correct.
Error messages
If any problems occur, an error message will appear:
Error: the system update was not successful
If you see this error or encounter other difficulties, try the
following:
• Make sure that all other USB devices are disconnected
• Make sure that you have copied all the files and sub-
folders included with the update, as described in step 5
above
• Use a different, freshly-formatted USB storage device
Advertisement
Table of Contents
