3-5: Keyboard Zones - Korg NAUTILUS Series Parameter Manual

3–5: Keyboard Zones
0–1a
3–5a
1–1b
3–5b
Here you can specify the key zones in which MIDI tracks 1–
16 will sound.
The top/bottom key settings specify the zone in which MIDI
tracks 1–16 will sound, and the top/bottom slope settings
specify the key range over which the volume will change
starting from the top/bottom key.
These settings do not affect MIDI transmission/reception.
All note data that is received will be recorded into the
internal sequencer, and all note data from the internal
sequencer or from the keyboard will be transmitted.
3–5a: Zone Map
This area provides a graphic display of the note and velocity
ranges in which each MIDI Track will sound. The slope
portions of the zones are displayed in a different color.
Under the Key Zone graphic, a keyboard graphic shows the
most recently-played note in green, aligned with the
keyboard zones.
To the left of the Velocity Zone graphic, a meter shows the
velocity of the most recently-played note; red dots above the
graphic show the Zone(s) triggered by that velocity.
Zone Map
Key zone display
Bottom Slope
Bottom Key
Track 1
Track 16
C–1
Selecting track
Top Slope
E1
SEQUENCER > MIDI Filter/Zones 3–5: Keyboard Zones
3–5b: Keyboard Zones
Track 01 (Track Number)
Top Key
Specifies the top key (upper limit) of the notes that will
sound each MIDI track.
Top Slope
Specifies the range of keys (12 is one octave) over which the
volume will be reached starting from the top key.
0: The volume will be at the original level from the top key.
12: The volume will increase gradually as you play
downward, and will reach the original volume one octave
below the top key.
72: The volume will increase gradually as you play
downward, and will reach the original volume six octaves
below the top key.
G9
3–5PMC
[C–1...G9]
[00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
Velocity zone display
Top Velocity
Top Slope
Bottom Slope
Bottom Velocity
1 16
Track
493