134: Wah - Amp Sim; 135: Decimator - Amp Sim - Korg NAUTILUS Series Parameter Manual

134: Wah - Amp Sim

This effect combines a mono wah and an amp simulation.
You can change the order of the effects.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Wah/Auto Wah
+
Wah
Right
Sweep Mode
Envelope
Auto
D-mod
D -mod
LFO
LFO
Routing
Routing
Switches the order of the wah and amp simulation.

135: Decimator - Amp Sim

This effect combines a mono decimator and an amp
simulation. You can change the order of the effects.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Decimator
Resolution
+
Decimator
Pre LPF
Right
Routing
Routing [Decimator > Amp, Amp > Decimator]
Switches the order of the decimator and amp simulation.
DECIMATOR
Pre LPF
Turn the harmonic noise caused by lowered sampling on and
off. See "Pre LPF" on page 785.
Sampling Frequency [Hz]
Sets the sampling frequency.
High Damp [%]
Sets the amount of high-frequency attenuation.
BIT SHAPE
For more information on these parameters, see "Resolution
[bits]" on page 785.
Resolution [bits]
Sets the data bit length.
Output Level
Sets the decimator output level.
872
Routing
Amp Simulation
Amp Simulation Filter
Wet / Dry
[Wah > Amp, Amp > Wah]
Routing
Amp Simulation
Output Level
Amp Simulation Filter
High Damp
[Check-box]
[1.00k...48.00k]
WAH
For detailed information, see "WAH" on page 861.
Wet / Dry
AMP SIM
Amplifier Type
Selects the type of guitar amplifier.
Wet / Dry
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
AMP SIM
Amplifier Type
Selects the type of guitar amplifier.
Wet / Dry
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
Wet / Dry
[0...100]
[4...24]
[0...100]
[SS, EL84, 6L6]
[SS, EL84, 6L6]