Table of Contents
Advertisement
COMBINATION mode
3–5b: Keyboard Zones
Timbre 01
Top Key
Specifies the top key (upper limit) of the notes that will
sound each timbre.
Top Slope
Specifies the range of keys (12 is one octave) over which the
volume will be reached starting from the top key.
0: The volume will be at the original level from the top key.
12: The volume will increase gradually as you play
downward, and will reach the original volume one octave
below the top key.
72: The volume will increase gradually as you play
downward, and will reach the original volume six octaves
below the top key.
Bottom Slope
Specifies the range of keys (12 is one octave) over which the
volume will be reached starting from the bottom key.
0: The volume will be at the original level from the bottom
key.
12: The volume will increase gradually as you play upward,
and will reach the original volume one octave above the
bottom key.
72: The volume will increase gradually as you play upward,
and will reach the original volume six octaves above the
bottom key.
Bottom Key
Specifies the bottom key (lower limit) of the notes that will
sound each timbre.
How volume will change according to keyboard location
Volume
Bottom Slope
Bottom Key
Top Key and Bottom Key settings can also be input by
holding down the ENTER button and playing a note on the
keyboard.
It is not possible to set the bottom key above the top key
of the same timbre. Nor is it possible for the top and
bottom slopes to overlap.
Timbres 02...16
These are the key zone settings for timbres 2 through 16.
They are the same as for timbre 1. See "Timbre 01".
418
[C–1...G9]
[00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
[00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
[C–1...G9]
Top Slope
Top Key
v 3–5: Page Menu Commands
• Compare →p.112
• Write Combination →p.433
• Exclusive Solo →p.113
• Copy From Program →p.433
• PAGE →p.126
• MODE →p.126
Key
Advertisement
Table of Contents
