Table of Contents
Advertisement
COMBINATION mode
1–8: Controllers
1–8a
1–8b
Here you can set the Combination functions of the SW1
switch, SW2 switch, and the RT control knobs 1–6. These
settings are made independently for each combination.
Note: You can set the timbre in question if "Mixer
Parameter" is set for the knobs or switches.
1–8a: RT Control Knob Assign
This configures the functions of the RT control knobs 1–6.
Mainly, you can assign MIDI control change types here. For
more information, please see "RT Control Knobs 1–6
Assignments" on page 914.
The functions that you set here are enabled when you select
a USER with the SELECT button and then operate the RT
control knobs 1–6. For more information, please see "1–8a:
RT Control Knob Assign" on page 48.
404
1–8b: Panel Switch Assign
Here you can assign the function of the SW1 and SW2
buttons. For details on the functions that can be assigned, see
"SW1/2 Assignments" on page 913, "1–8b: Panel Switch
Assign" on page 48.
v 1–8: Page Menu Commands
• Compare →p.112
• Write Combination →p.433
• Exclusive Solo →p.113
• Copy From Program →p.433
• PAGE →p.126
• MODE →p.126
1–8PMC
1–8PMC
Advertisement
Table of Contents
