091: L/C/R Bpm Delay - Korg NAUTILUS Series Parameter Manual

091: L/C/R BPM Delay

The L/C/R delay enables you to match the delay time with
the song tempo. You can also synchronize the delay time
with the arpeggiator or sequencer. If you program the tempo
before performance, you can achieve a delay effect that
synchronizes with the song in real-time. Delay time is set by
notes.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
L Delay
Input Level D-mod
+
C Delay
High Damp Low Damp
R Delay
Input Level D-mod
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
Base Note x Times
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.823.
Source
Selects the modulation source for the input level. p.823.
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect.
Time Over?>.
The maximum delay time is 2,730msec. If the combination
of BPM, Base Note, and Times exceeds this limit, the error
message "OVER!" appears in the display. If this occurs,
change the delay time parameters so that this message no
longer appears.
L Delay Base Note
This sets the basic length of the Left Delay, relative to the
BPM setting. The values range from a 32nd note to a whole
note, including triplets.
Times
This multiplies the length of the Base Note. For instance, if
the Base Note is set to a sixteenth note, and Times is set to 3,
the delay length will be a dotted eighth note.
Level
Sets the output level of the Left Delay.
C Delay Base Note
This sets the basic length of the Center Delay, relative to the
BPM setting.
Times
This multiplies the length of the Center Delay's Base Note.
Level
Sets the output level of the Center Delay.
Wet / Dry
Level
Spread
Level
Feedback
Level
Wet / Dry
[+/–100]
[Off...Tempo]
[MIDI, 40.00...300.00]
[---, OVER!]
[ ... ]
[x1...x32]
[0...50]
[ ... ]
[x1...x32]
[0...50]
Delay 091: L/C/R BPM Delay
R Delay Base Note
This sets the basic length of the Right Delay, relative to the
BPM setting.
Times
This multiplies the length of the Right Delay's Base Note.
Level
Sets the output level of the Right Delay.
Feedback (C Delay)
Sets the amount of feedback from the Center Delay.
Source
Selects the modulation source for the Center Delay
feedback.
Amount
Sets the modulation amount of the Center Delay feedback.
High Damp [%]
Sets the amount of high-frequency attenuation for the
feedback path.
Low Damp [%]
Sets the amount of low-frequency attenuation for the
feedback path.
Spread
Sets the width of the stereo image of the effect sound. For
more information, see "Spread" on page 833.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
[ ... ]
[x1...x32]
[0...50]
[+/–100]
[Off...Tempo]
[+/–100]
[0...100]
[0...100]
[0...50]
845