Korg NAUTILUS Series Parameter Manual page 448

Hide thumbs Also See for NAUTILUS Series:

Table of Contents

COMBINATION mode

3. In the DrumKit "IFX" popup, select the output bus to

which you want to patch the signal: an insert effect or

L/R, 1–4, 1/2–3/4, or Off.

4. To execute the Drum Kit Insert Effect Patch

command, press the OK button. To cancel, press the

Cancel button.

Note: To restore the condition of the drum kit, execute

IFX1→IFX1, IFX2→IFX2, IFX3→IFX3, IFX4→IFX4,

IFX5→IFX5, IFX6→IFX6, IFX7→IFX7, IFX8→IFX8,

IFX9→IFX9, IFX10→IFX10, IFX11→IFX11, and

IFX12→IFX12.

Alternatively, you can press the Reset button to restore the

same settings.

Copy MFX/TFX

This command copies effect settings from PROGRAM,

COMBINATION, SEQUENCER, or SAMPLING modes.

For more information, please see "Copy MFX/TFX" on

Note: The slot's MIDI control channel, as specified by the

Ch parameter on the MFX/TFX– MFX 1-2 and TFX 1-2

pages, will not be copied.

Swap MFX/TFX

This command swaps (exchanges) insert effect settings. For

more information, please see "Swap MFX/TFX" on

Note: The slot's MIDI control channel, as specified by the

Ch parameter on the MFX/TFX– MFX 1-2 and TFX 1-2

pages, will not be copied.

Write FX Preset

For more information, please see "Write FX Preset" on