Table of Contents
Advertisement
043: Multitap Cho/Delay 4Taps
This effect has four chorus blocks, each with a different LFO
phase. You can create a complex stereo image by setting
each block's delay time, depth, output level, and pan
individually. You can also fix some of the chorus blocks to
combine the chorus and delay effects.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Feedback
+
Right
LFO: Triangle
MOD DELAY
Taps 1-4
There are four delay taps, each with separate settings for
delay time, chorus depth, level, and pan. The chorus LFO
phases are different for each tap:
Tap 1 = 0 degrees
Tap 2 = 180 degrees
Tap 3 = 90 degrees
Tap 4 = 270 degrees
Tap 1...4 [msec]
This sets the tap's delay time.
Depth 1...4
This sets the tap's chorus depth.
Level 1...4
This sets the tap's output level.
044: Multitap Cho/Delay 6Taps
This effect has six chorus blocks with different LFO phases.
You can produce a complex stereo image by setting a
different delay time and depth for each block. You can
control the delay output level via a modulation source.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Feedback
+
Right
0 [degree]
180 [degree]
60 [degree]
240 [degree]
120 [degree]
300 [degree]
LFO: Triangle
D
-mod
On/Off Control
802
Tap1 Delay
Level
Pan
Tap2 Delay
Level
Pan
Tap3 Delay
Level
Pan
Tap4 Delay
Level
Pan
0 [degree]
180 [degree]
90 [degree]
270 [degree]
[0...1000]
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap4 Delay
Tap5 Delay
Tap6 Delay
Panning Preset
Pan 1...4
This sets the tap's stereo position.
Tap 1 Feedback
Tap1 Feedback
Sets the Tap1 feedback amount.
Wet / Dry
Source
Selects the modulation source of Tap1 feedback amount and
effect balance.
Amount
Wet / Dry
Sets the Tap1 feedback amount and modulation amount.
LFO
Frequency [Hz]
This sets the LFO speed, in Hz.
LFO Type
This controls whether the effect uses its individual LFO, or
one of the Common FX LFOs. For more information, see
"LFO Type" on page 779.
Common LFO Phase Ofs [deg]
When Type is set to Common FX LFO 1 or 2, this lets you
offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with modulatable
[0...30]
control over wet/dry balance. For more information, see
"OUTPUT" on page 762.
[0...30]
MODULATION DELAY
Taps 1-6
There are six delay taps, each with separate settings for delay
time, chorus depth, and on/off/modulation status. The chorus
LFO phases are different for each tap:
Wet / Dry
Tap 1 = 0 degrees
Tap 2 = 180 degrees
Tap 3 = 60 degrees
Tap 4 = 240 degrees
Wet / Dry
Tap 5 = 120 degrees
Tap 6 = 300 degrees
Tap 1...6 [msec]
This sets the tap's delay time.
Depth 1...6
This sets the tap's chorus depth.
[L6...L1, C, R1...R6]
[Off...Tempo]
[0.02...13.00]
[Individual, Common1, Common2]
[–180...+180]
[+/–100]
[+/–100]
[0...2000]
[0...30]
Advertisement
Table of Contents
