Using The Parameter Details Area - Korg NAUTILUS Series Parameter Manual

Hide thumbs Also See for NAUTILUS Series:

Table of Contents

Using the Parameter Details area

The LCD displays are divided into two sections. The first is

the main part of the display, which includes all of the major

MOD-7 parameters. This provides quick access to different

functions, and an easy-to-read overview of the current

The other section is the Parameter Details area, located in the

upper right-hand part of the screen. This area shows

information for the selected parameter, such as descriptive

graphics and AMS assignments.

Assigning AMS modulation

Parameters which have AMS modulation shown only in the

Parameter Details area are marked with either a black "D" or

a white "D" (for "Details") and an arrow. The black "D"

indicates that the Parameter Details area includes the

possibility of AMS modulation, but that none is assigned;

the white "D" and arrow show that an AMS source is already

To edit AMS settings in the Parameter Details area:

1. Touch the parameter in the main area of the display.

If the parameter supports AMS modulation, the Parameter

Details area will show one or more AMS sources and

intensities.

2. Edit the AMS settings in the Parameter Details area.

Note that AMS can often modulate parameters outside the

range of the stored values, as if you were pushing the

parameter beyond the ends of the knob.

MOD-7 Overview Using the Parameter Details area

Details area