Ep-1: Tone Adjust - Korg NAUTILUS Series Parameter Manual

EP-1: Tone Adjust

EP-1 Tone Adjust Default Settings
Volume
Attack
Noise
Level
Common Tone Adjust parameters
The EP-1 supports the following Common Tone Adjust
parameters:
Off. This means that the Tone Adjust control has no effect.
Common LFO Speed. (–99...+99, Relative)
This scales the EXi Program's Common LFO Frequency.
When the LFO is in MIDI/Tempo mode, this adjusts the
Base Note.
Common Step Sequencer Attack Smoothing. (00...99,
Absolute)
This Absolute parameter sets amount of attack smoothing
for the Common Step Sequencer. For more information,
please see "Smoothing" on page 137.
Button 4:
Tine Vibrato On/Off
Tine Tine Vibrato
Treble Bass Intensity
Release Harmonic Harmonic
Noise Sound Sound
Level Level Decay
EP-1: Tone Adjust Insert Effects
Button 6:
Cabinet On/Off
Vibrato Cabinet Hammer
Speed Drive Width
Harmonic IFX
Sound Speed
IFX
Release [Hz]
Depth
Common Step Sequencer Decay Smoothing. (00...99,
Absolute)
This Absolute parameter sets amount of decay smoothing
for the Common Step Sequencer. For more information,
please see "Smoothing" on page 137.
Attack
Brightness
IFX IFX
Resonance Wet/Dry
375