Table of Contents
Advertisement
SEQUENCER mode
Audio tracks
3. In "At Measure," specify the measure location at
which the data will be inserted. (The measure you
specified in Track Edit page From Measure will be set
as a default.)
4. In "Length," specify the number of measures that will
be inserted.
5. In Meter, specify the time signature of the measures
that will be inserted.
If you want the inserted measures to match the existing
time signature, specify **/**. With any setting other than
**/**, the time signature of the inserted measures will
change, and the specified time signature will apply to all
tracks for those measures.
6. Specify the track(s) for which you want to execute the
command.
If you execute with All Tracks, All MIDI Tracks, and
All Audio Tracks unchecked, the measures will be
inserted into the track that's selected in Track Select. Be
aware that at this time, the playback data that follows the
insert location will move toward the end of the song
according to the number of inserted measures, but the
time signature and tempo will not move.
If you check All Tracks, the measures will be inserted
into all tracks including the Master Track. The playback
data in subsequent measures will play just as it did before
this command was executed.
If you check All MIDI Tracks (when a MIDI track is
selected), the measures will be inserted into all MIDI
tracks.
If you check All Audio Tracks (when an Audio track is
selected), the measures will be inserted into all audio
tracks.
7. To execute the Insert Measure command, press the
OK button. To cancel, press the Cancel button.
542
Time signature = **/**
Track 1
1 (4/4) 2 (4/4)
Before Insert
1 (4/4) 2 (4/4)
Track 2
Insert two measures
Track 2 1 (4/4) 2 (4/4)
After Insert
Track 1
1 (4/4) 2 (4/4)
Measures 4 and 5 will use the previously specified
time signature.
1 (4/4) 2 (4/4)
Track 1
Before Insert
1 (4/4) 2 (4/4)
Track 2
Insert two measures
1 (4/4) 2 (7/8) 3 (7/8)
Track 2
After Insert
1 (4/4) 2 (7/8)
Track 1
Measures 2 and 3 will be 7/8, and measures 4 and
5 will be the previously specified time signature.
If you execute Insert Measure at a location in the middle
of an audio event that spans several measures, two new
regions that play the regions divided at the "At Measure"
will be automatically created and named.
Note: The WAVE file itself will not be modified.
Repeat Measure
This command repeatedly inserts the specified measures for
the specified number of times. When you execute the Repeat
Measure command, the measures will be inserted following
the measure specified by To End of Measure, and musical
data following the inserted data will be moved backward. It
is convenient to use this command when you have a song
that you playback with "Track Play Loop" (0–3a) turned on,
and wish to expand it into musical data.
1. Use Track Select to select the MIDI track (MIDI
Track 01–16) or audio track (Audio Track 01–16) that
you want to insert data into.
2. Select "Repeat Measure" to open the dialog box.
MIDI tracks
Audio tracks
3 (3/4)
4 (5/4) 5 (2/4)
3 (3/4)
4 (5/4) 5 (2/4)
3 (3/4)
4 (5/4)
5 (2/4)
3 (3/4)
4 (5/4) 5 (2/4)
Time signature = 7/8
3 (3/4)
4 (5/4) 5 (2/4)
3 (3/4)
4 (5/4) 5 (2/4)
4 (5/4)
5 (2/4)
3 (7/8)
4 (5/4) 5 (2/4)
Advertisement
Table of Contents
