Pentair FLECK 3150 NXT Installer Manual page 94

Installer manual Fleck 3150 NXT/NXT2 - Programming
Parameter
AUX. 1: TIME
BASED - END
TIME #2
AUX. 1:
VOLUME BASED
– VOLUME - L
AUX. 1:
VOLUME BASED
- DURATION
AUXILIARY 2
94 / 182
Options Definition
OFF Minute
From start
time
#2 + 1 minu
te until the
total
regeneratio
n duration
0 to MAX
1 to 7200 Second
STANDBY
OFF (default)
ALARM
BASED
CYCLE
BASED
TIME
BASED
VOLUME
BASED
Only displayed if "Time based" is
chosen for auxiliary 1 and START
TIME #2 ON;
Range depends on Start and end
time #1 values.
Liter Only displayed if "volume based"
is chosen for auxiliary 1;
Volume range depend on
capacity;
Even if maximum theoretical
programmable value is 999999
the controller will take the unit
capacity as maximum volume.
Only displayed if "volume based"
is chosen for auxiliary 1;
Volume range depend on
capacity;
Even if maximum theoretical
programmable value is 9999 the
controller will take 7200 as
duration.
Activates relay from beginning of
regeneration and during standby
phase.
- Any alarm or error detected by
the controller will start signal
output from Auxiliary relay#2.
-
-
- This choice will only available
when metered regeneration
type.
Ref. MKT-IM-010 / C - 18.10.2019
Note