Pentair FLECK 3150 NXT Installer Manual page 115

Info
Lock Settings prevents unexpected access to master programming.
Info
Once lock settings option is activated, the controller returns to normal service display.
The next time accessing the menu, the controller will call for either a password, or will
grant access to menu only if programmed condition are fulfilled.
Info
Contact your supplier for more information.
Options:
• off;
• delayed;
• enter Code;
• time Based.
a) Select save as non-factory option with
b) Default setting: disabled;
c) Press
6.2.5.32 Parameters saving
Info
When the last parameter is set and the button
controller updates the database based on the new programming.
Info
The main screen appears and valve status is initializing. Wait until updating is finished,
this may take a few seconds.
6.2.6 Diagnostic
Info
Depending on current settings, some displays cannot be viewed.
Info
If none of the buttons are pushed for 5 minutes in the Programming mode, or if there is
a power failure, the controller returns to Service mode without saving.
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Programming
to validate the selection.
and ;
pressed (after lock settings), the
115 / 182