Pentair FLECK 3150 NXT Installer Manual page 116

Installer manual Fleck 3150 NXT/NXT2 - Programming
6.2.6.1 Commands
a) Press and hold
b) Press
c) Press and hold
6.2.6.2 Flow rate
Info
The display is updated every second.
6.2.6.3 Peak flow rate
Info
The controller registers the highest flow rate since the last regeneration.
6.2.6.4 Totalizer
Info
The controller registers the total volume of treated water that passes through the
meter since start-up (or last hard reset).
a) To reset, press and hold the buttons
5 seconds until the display shows zero.
6.2.6.5 Reserve
Info
Shows the reserve capacity settings.
116 / 182
to enter the Diagnostic mode.
to see the next data group or press
to exit the Diagnostic mode at any time.
to return to previous data group.
and for
Ref. MKT-IM-010 / C - 18.10.2019