Table of Contents
Advertisement
6.1.5.19 Auxiliary relay/Chemical pump
Mandatory
The system can't be set with auxiliary relay and chemical pump at the same time. Only
one option can be used.
Auxiliary relay
Set the relay output during regeneration.
Info
This parameter has two steps of settings. The first one activates the output, and the
second one deactivates the output. The time 00:00:00 correspond to the beginning of
regeneration time.
a) Activate the relay with
b) Default setting: disabled.
c) Press
next parameter.
d) Set the relay activation time with
e) Press
next parameter.
f) Set the relay deactivation time with
g) Press
next parameter.
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Programming
and
to validate the selection and advance to the
to validate the selection and advance to the
to validate the selection and advance to the
.
Disabled.
Relay enabled at the
beginning of
,
and
.
regeneration.
,
and
.
Relay disabled 10 min.
after the start of
regeneration.
Relay enabled during
cycle 2 as in chapter
Programming
regeneration cycles time
[}Page 108] .
75 / 182
Hide quick links:
Advertisement
Table of Contents
