Pentair FLECK 3150 NXT Installer Manual page 146

Installer manual Fleck 3150 NXT/NXT2 - Maintenance
9.4.7 Cams replacement
a) Using a flat screwdriver, unscrew (1) and open the cover (2).
b) Remove the micro-switches (3), see Micro-switches replacement [}Page 145].
c) Disconnect the motor (4).
d) Using a Philips screwdriver, open the controller (7).
e) Using pliers, remove the clip (5) and the connecting pin (6).
f) Using pliers, remove the circlip (12) and the wheel (11).
g) Using a 10 mm wrench, unscrew (9) and remove the plate (10) and the
camshaft (8).
h) Using a pin punch, remove the pin (13).
i) Reverse above procedure steps to rebuild.
146 / 182 Ref. MKT-IM-010 / C - 18.10.2019