Pentair FLECK 3150 NXT Installer Manual page 151

9.4.11 Valve on tank assembly
a) Lubricate the Oring with approved silicone grease.
b) Spin the valve (1) onto the tank (2), ensuring the threads are not cross-threaded.
c) Rotate the valve (1) clockwise and freely, without using force until it comes to a
stop.
Info
This stop position is considered point zero.
d) Rotate the valve (1) clockwise from point zero to between ¼ turn and ½ turn.
CAUTION
Do NOT exceed 27 Nm of torque when installing the valve. Exceeding this limit may
damage the threads and cause failure.
Point 0
Ref. MKT-IM-010 / C - 18.10.2019
Installer manual Fleck 3150 NXT/NXT2 - Maintenance
¼ turn
Point 0 ½ turn
151 / 182