Pentair FLECK 3150 NXT Installer Manual page 82

Installer manual Fleck 3150 NXT/NXT2 - Programming
3. Valve status
4. Flow indicator
5. LED Status
Indicator
6.
7. Time of the
day
8. Operating
mode
9. Regen. button
10. Up button
11. Down button
12. Left button
82 / 182
• Initializing: after a power failure or a change in the
programming, the controllers initializes for approximately
30 seconds;
• Lock windows: the controller has acquired the lockout
windows;
• Lock remote: the controller has acquired the lockout
remote;
• Regeneration Inhibition indicator: In a multi-valves system, a
valves is in regeneration while another valve is waiting for
regeneration;
• Valve in service;
• Flashing: Regeneration queued;
• Valve in standby;
• Remote Regeneration.
• Flashing when flow is going through the meter.
• Blue: In Service
• Flashing blue: Regeneration Queued
• Green: Regeneration
• Flashing green: Standby
• Red: Error condition present
• All LED flashing: Delayed unlock
• Master unit (auto-assigned) for multi-unit system;
• Empty for single unit.
• 24h mode or 12h am/pm depending on units type selected
• Remaining volume in volumetric mode;
• Remaining days before regeneration in timeclock mode.
• Navigate to next menu option
• Display time of programmed regeneration
• Adjust menu value up
• Adjust menu value down
• Navigate to previous menu option
Ref. MKT-IM-010 / C - 18.10.2019